KTM 400 Motorcycle User Manual


 
ENGLISH
6
Combination switch (EXC)
The light switch has 2, respetively 3 switch positions.
A = Light off (this function is not available in all models)
B = Low beam on
C = High beam on
You may use button
1 to actuate the horn.
The red short circuit button
2 serves to switch off the engine. Leave the
switch pressed until the engine stops.
Headlamp switch (EXC USA)
In this model the headlamp is switched on with the pull switch 3.
Flasher switch
Flasher left
Flasher right
Emergency OFF button (EXC)
The red emergency-OFF button 4 is arranged adjacent to the
throttle grip. To turn off the engine, push the button until the engine
comes to a standstill.
Pushing of the black starter button 5 actuates the E-starter.
ƽ
WARNING
ƽ
ALWAYS VERIFY THAT THE TRANSMISSION HAS BEEN SET TO IDLE (NEUTRAL) BEFORE
ACTUATING THE STARTER BUTTON
. IF YOU START THE MOTORCYCLE WITH A GEAR
ENGAGED
, THE MOTORCYCLE WILL MOVE FORWARD.
Emergency OFF switch (EXC Australia)
The red emergency-OFF switch 6 is arranged adjacent to the throttle grip.
In this position, the E-starter is operational and the engine can
be started.
In this position, the E-starter and ignition circuits are interrup-
ted. The E-starter cannot be actuated, and the engine will not
start, not even if you attempt to start it with the kickstarter.
Pushing of the black starter button
5 actuates the E-starter.
ƽ
WARNING
ƽ
ALWAYS VERIFY THAT THE TRANSMISSION HAS BEEN SET TO IDLE (NEUTRAL) BEFORE
ACTUATING THE STARTER BUTTON
. IF YOU START THE MOTORCYCLE WITH A GEAR
ENGAGED
, THE MOTORCYCLE WILL MOVE FORWARD.
2
A
B
C
1
3
5
4
5
6