KTM 250 SX-F, 250 XC-F, XCF-W, 250 EXC-F, EXC-F Motorcycle User Manual


 
OPERATION INSTRUMENTS
»
ENGLISH
7
1
2
3
4
5
Starter button
Pushing the red starter button [1] will actuate the E-starter.
Emergency OFF switch (EXC-F Australia)
The red emergency-OFF switch [2] is arranged adjacent to the throttle grip.
In this position, the E-starter is operational and the engine can
be started.
In this position, the E-starter and ignition circuits are
interrupted.The E-starter cannot be actuated, and the engine will
not start, not even if you attempt to start it with the kickstarter.
Pushing the black starter button [3] will actuate the E-starter.
Indicator lamps
The green control lamp [4] flashes in the same rhythm as the flash-
ing indicator when the indicator is working.
The blue control lamp [5] lights up when the high beam is on.
TEST
All of the display segments briefly light up for the display function test.
Electronic speedometer
The display in the electronic speedometer is activated as soon as you press
a button on the speedometer or an impulse is received from the wheel sen-
sor. The display lights up when the engine is running.
The display is cleared if no button is pressed for 1 minute or no impulse is
received from the wheel sensor.
The | button is used to change between display modes.
The + and buttons are used to control various functions.