KTM 1190 RC8 JP Motorcycle User Manual


 
OPERATING ELEMENTS 64
Press the MODEbutton briefly.
RPM1andRPM2 appear on the info display.
The engine speed afterRPM1 flashes.
Info
The engine speed can be set at intervals of 50.
RPM1 is the engine speed above which the shift warning light starts to flash.
Set the engine speed with the button or the button .
Press the MODEbutton briefly.
The engine speed afterRPM2 flashes.
Info
RPM2 is the engine speed above which the shift warning light lights up con-
stantly. IfRPM1 =RPM2, the shift warning light lights up constantly when you
reach the engine speed set.
Set the engine speed with the button or the button .
Press the MODEbutton briefly.
The settings are stored and the display changes to theSETTINGmenu.
Info
At delivery,RPM1 is set to 10000 andRPM2 to 10500.
Press the button briefly and repeatedly until the symbol is on BACK... in the info
display.
Press the MODEbutton briefly.
Press the button briefly and repeatedly until the symbol is on EXITSETUP in the
info display.