Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 133
700263-01
– Check the brake linings for minimum thickness.
Minimum thickness ≥1mm (≥0.04in)
» If the minimum thickness is less than specified:
–
Change the front brake linings.x
9.40Checking rear brake fluid level
Warning
Danger of accidents Failure of brake system.
– If the brake fluid level falls below the MIN mark, there may be a leak in the brake system or the brake linings are completely
worn out. Have the brake system checked in an authorized KTM-RC8 workshop before continuing your journey.
Warning
Danger of accidents Reduced braking effect caused by old brake fluid.
– Have the brake fluid of the front and rear brakes changed according to the service plan in an authorized KTM-RC8 workshop.