Filter
Top Products
58
Setting and adjustment
XV-D705GD/XV-D703TN
LET0142-003A
[2U, 3U, 4U, US, UB, UT] EN
Speaker setting
You can make speaker setting according to your system. Normally, simply select
“5.1 CHANNEL” or “2 CHANNEL”. However, if you select “EXPERT”, you can set
various settings to match your speakers.
SPEAKER CHANNELS
You can select the speaker channels
according to the speaker system connected
to
• 2 CHANNEL
When you connect to a 2-channel
amplifier, or use 2 speakers.
• 5.1 CHANNEL
When you connect to a 5.1-channel amplifier and use the front, rear , center and
sub-woofer speakers.
• EXPERT
When you want to set the various settings to match your speakers. The
following five setting items are available.
SPK.SETTING
5.1 CHANNEL
LEVEL
DELAY
TEST TONE
F. SP
Large
C. SP
Small
R. SP
Small
S.woofer
BASS
PREFERENCE2PREFERENCE1
PRESS KEY
NOTES
¶
When selecting 5.1 CHANNEL or EXPERT, set DOWN MIX to OFF (see page
55).
¶ Dolby Digital LFE (Low Frequency Effect) signals are always fed from the
SUBWOOFER output on the rear panel of the unit regardless of speaker
setting.
¶ When playing back digital audio output signals of the unit using an external
decoder, speaker setting above is invalid. Make setting of the external
decoder properly.