Filter
Top Products
36
English
4. Press BALANCE/SURROUND ADJUST repeatedly until
“DSP EFFECT” appears on the display.
The display changes to show the current setting.
5. Turn MULTI JOG to select the effect level, while the indication of
the previous step is still on the display.
As you turn it, the effect level changes as follows:
As the number increases, the selected 3D-PHONIC mode
becomes stronger.
To cancel the 3D-PHONIC mode
Turn MULTI JOG until “DSP OFF” appears in step 3.
The 3D-PHONIC and DSP indicators go off from the display.
Note:
Once you have adjusted the 3D-
PHONIC modes, it is memorized
for each 3D-PHONIC mode.
BALANCE/SURROUND
ADJUST
MULTI JOG
DSP EFFECT 1 DSP EFFECT 2
DSP EFFECT 4
DSP EFFECT 3
DSP EFFECT 5
EN34_46.RX-884R[E]/1.PM5 98.3.26, 0:58 PM36