JVC RX-884RBK Automobile Alarm User Manual


 
35
English
Using the DSP Modes
AUDIO/TV
/VCR
CATV
/DBS
MULTI JOG
DSP MODE
Notes:
To enjoy the software
encoded with Dolby Digital,
you must connect the source
component using the digital
terminal on the rear of this
receiver.
The 3D-PHONIC mode is not
used with the other DSP
modes such as the DAP
mode and the Surround
mode. When the 3D-PHONIC
mode is turned on, the other
DSP mode, if used, will be
turned off.
Notes on the indications:
The indicator of the selected
DSP mode also lights up on
the display while selecting.
The PRO LOGIC indicator
lights up when the Dolby Pro
Logic decoder built in this
receiver is activated.
The Dolby Pro Logic decoder
is used not only for the analog
sources but also for the
sources encoded with Dolby
Digital in the following cases:
When only front channel
signals are encoded.
When front channel and
monaural rear channel
signals are encoded.
While the Dolby Pro Logic is
activated for this type of Dolby
Digital source, the
Ÿ
DIGITAL
indicator goes off.
HALL
DANCE CLUB
LIVE CLUBTHEATER
3D ACTION
HEADPHONE
3D DRAMA
PAVILION
3D THEATER
DSP OFF
IMPORTANT:
When using the Remote Control, check to see if its remote control
mode selector is set to the correct position:
To operate this receiver, set it to “AUDIO/TV/VCR” (except when
selecting the DBS tuner as the source).
Using the 3D-PHONIC Modes
When using the 3D-PHONIC modes, you need only two front speakers to reproduce the
soundtracks of software encoded with Dolby Digital (bearing the mark
DIGITAL
) or
with Dolby Surround (bearing the mark
DOLBY SURROUND
).
On the front panel:
1. Select and play the source encoded with Dolby Digital (bearing the mark
DIGITAL
) or with Dolby Surround (bearing the mark
DOLBY SURROUND
).
When you play back the source encoded with Dolby Digital and select the digital
input for that source, the Ÿ DIGITAL indicator lights up on the display.
2. Press DSP MODE.
The current DSP mode appears on the display.
3. Turn MULTI JOG until the mode — 3D ACTION (or 3D
DIGITAL), 3D DRAMA, or 3D THEATER — you want
appears on the display, while the indication of the previous
step is still on the display.
As you turn it, the DSP modes change as follows (the 3D-
PHONIC and DSP indicators also light up on the display):
When the digital input is selected to play the source encoded with Dolby
Digital:
For other sources:
3D ACTION: Best for action and war movies — where the action is fast and
explosive.
3D DRAMA: Best for dramas and romantic movies — where the action is
slow and soft.
3D THEATER: Reproduces the sound field of a theater.
3D DIGITAL: Reproduces multi-sound source encoded with Dolby Digital.
DSP OFF
:
No DSP mode is applied.
For the other modes, see pages 38 and 43.
If you need to make any adjustment, go to the following steps.
DIG-THEATER
HEADPHONE
3D DIGITAL
DSP OFF
EN34_46.RX-884R[E]/1.PM5 98.4.16, 2:27 PM35