Filter
Top Products
21
English
Center Delay Time Setting
Register the delay time of the sound from the center speaker, comparing that of the
sound from the front speakers.
If the distance from your listening point to the center speaker is equal to that to the front
speakers, select 0 msec. As the distance to the center speaker becomes shorter, increase
the delay time.
On the front panel
only
:
1. Press SETTING repeatedly until “CENTER DELAY”
appears on the display.
The display changes to show the current setting.
2. Turn MULTI JOG to select the delay time of the center
speaker output, while the indication of the previous step is
still on the display.
• Turn it clockwise to increase the delay time from 0 msec
(“C. DELAY 0ms”) to 5 msec (“C. DELAY 5ms”).
• Turn it counterclockwise to decrease the delay time from
5 msec (“C. DELAY 5ms”) to 0 msec (“C. DELAY
0ms”).
Rear Delay Time Setting
Register the delay time of the sound from the rear speakers, comparing that of the sound
from the front speakers.
If the distance from your listening point to the rear speakers is equal to that to the front
speakers, select 0 msec. As the distance to the rear speakers becomes shorter, increase
the delay time.
On the front panel
only
:
1. Press SETTING repeatedly until “REAR DELAY” appears
on the display.
The display changes to show the current setting.
2. Turn MULTI JOG to select the delay time of the rear
speaker output, while the indication of the previous step is
still on the display.
• Turn it clockwise to increase the delay time from 0 msec
(“R. DELAY 0ms”) to 15 msec (“R. DELAY 15ms”).
• Turn it counterclockwise to decrease the delay time from
15 msec (“R. DELAY 15ms”) to 0 msec (“R. DELAY
0ms”).
Crossover Frequency Setting
Small speaker cannot reproduce the bass sound very well. So, if you have used a small
speaker any for the front, center, or rear channels, this receiver automatically reallocate
the bass elements, originally assigned to the channel for which you have connected the
small speaker, to another channel (for which you have connected the large speaker).
To use this function properly, you need to set this crossover frequency level according to
the size of the small speaker connected.
On the front panel
only
:
1. Press SETTING repeatedly until “CROSSOVER FRQ”
(Crossover Frequency) appears on the display.
The display changes to show the current setting.
SETTING
MULTI JOG
Notes:
• 1 msec increase (or
decrease) in delay time
corresponds to 30 cm (11
13
/
16
inches) decrease (or
increase) in distance.
• It is recommended that the
rear delay time for Dolby
Digital be set to 5 msec.
SETTING
MULTI JOG
Note:
This function takes effect only
when playing back a source
using the Dolby Digital.
However, if you have selected
“LARGE” for all speakers (see
page 20), this function will not
take effect.
Basic Settings
Note:
1 msec increase (or decrease)
in delay time corresponds to 30
cm (11
13
/
16
inches) decrease (or
increase) in distance.
SETTING
EN14_23.RX-884R[E]/1.PM5 98.3.26, 0:04 PM21