Filter
Top Products
4 EN
•AC Adapter
AP-V10EG
•Shoulder Strap
•Battery Pack
BN-V11U
(GR-FXM37/FX12)
BN-V20U
(GR-SXM47/SX22)
•Cable Adapter
(with an -IN connector)
(GR-SXM47/SX22 only)
•A/V (Audio/Video) Cable •S-Video Cable
(GR-SXM47/SX22 only)
•Power Cord
PROVIDED ACCESSORIES
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
Ⅲ
Available when the Power Switch is set to “ ” or “ ”.
Ⅲ
Operating the Power Zoom Lever during the demonstration stops the
demonstration temporarily. If the Power Zoom Lever is not moved for
more than 1 minute after that, the demonstration will resume.
Ⅲ
“DEMO MODE” remains “ON” even if the camcorder power is turned
off.
Ⅲ
To cancel Automatic Demonstration, set the Power Switch to “ ” and
press MENU while the demo is in progress. This takes you directly to the
demo mode’s Setting Menu (so you will not have to go through the main
Menu Screen). Rotate MENU to select “OFF” and press it.
NOTE:
When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
O
O
E
F
N
X
F
IT
DEMO MODE
Setting Menu
•Core Filter x 3
(for provided A/V Cable
and AC Adapter,
GR-FXM37/FX12 only)
•Core Filter x 4
(for provided A/V Cable,
S-Video Cable and AC Adapter,
GR-SXM47/SX22 only)
•Cable Adapter
(without an -IN connector)
(GR-FXM37/FX12 only)
•Lens Cap