JVC GR-SXM47 Automobile Electronics User Manual


 
24 EN
ON Records in S-VHS on a VHS or S-VHS cassette ( pg. 10).
OFF Records in VHS on a VHS or S-VHS cassette ( pg. 10).
Allows you to set the tape length depending on the tape used ( pg. 12).
FULL Make all of the indications appear on the LCD monitor**/
viewfinder during playback or recording.
SIMPLE Make the following indications disappear from the LCD
monitor**/viewfinder during recording or playback: cassette
warning, tape remaining time, battery pack remaining power
indicator and tape length indicator ( pg. 44, 45)
Refer to Animation and Time-Lapse ( pg. 26).
Refer to Time-Lapse ( pg. 26).
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance of
more than 1 m to the subject, the lens is out of focus at the
maximum telephoto setting. When set to ON, you can shoot a
subject as large as possible at a distance of approx. 60 cm.
Depending on the zoom position, the lens may go out of focus.
Allows you to select the language (ENGLISH or FRENCH) of Instant Titles
( pg. 25).
Allows you to set the current date and time ( pg. 9).
This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
ON Demonstrates certain functions automatically. When DEMO
MODE is set to ON and the Menu Screen is closed, the
demonstration starts.
Operating the Power Zoom Lever during the demonstration
stops the demonstration temporarily. If the Power Zoom Lever is
not moved for more than 1 minute after that, the demonstration
will resume.
NOTE:
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
OFF Automatic demonstration will not take place.
RECORDING
Advanced Features (cont.)
SYSTEM MENU (cont.)
: Factory-preset
TAPE LENGTH
REC TIME
JLIP ID NO.
DEMO MODE
INT. TIME
TITLE LANG.
S-VHS*
(S-VHS
ET*) (GR-SXM47/
SX22 only)
DATE/TIME
* S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is
loaded ( pg. 10). If a cassette is not loaded, S-VHS will be displayed in the Menu Screen.
S-VHS ET is preset to OFF.
** Models equipped with LCD monitor only.
TELE MACRO
OFF
ON
DISPLAY