Ingersoll-Rand 650940-X Automobile Parts User Manual


  Open as PDF
of 2
 
OPERATOR’S MANUAL 650940 -- X
R EL EA SE D: 8 -- 3 0 -- 9 6
REVISED: 6--4--10
(REV.
02 )
TWO--BALL PUMP SERIES
4.125 SQ.” HYDRAULIC MOTOR
0.8:1 RATIO
6” STROKE
INCLUDE MANUALS:6694X--X LOWER PUMPEND (PN 97999--012) &
FORM 3638--2 GENERAL INFORMATION MANUAL(PN 97999--353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, T ROUBLESHOOTING
650940--X
400 SERIES STAINLESS STEEL
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637148-1 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shippedwith thepump butitis includedwith eachServiceKit. Ifthis
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s Manual from ARO. (Manual 61626--100,
PN 97999--282).
• 637211- XX3 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series (Referto option chart) 650940--XX3..
Type Hydraulically Operated, Two--Ball....................
Ratio 0.8:1....................
Hydraulic Motor 61626--100............
Motor Repair Kit 637148--1..........
Motor Size 4.125 sq.’’ (26.6 sq. cm)..............
Stroke 6’’..................
Hydraulic Inlet 1/2” -- 14 NPTF--1(f)...........
Hydraulic Return 3/4” -- 14 NPS (f).........
Lower Pump End Series 66941--XX3.....
Lower Pump Repair Kit 637211--XX3.....
Material Inlet 2” NPTF--1 (m).............
Material Outlet 1--1/4’’ NPTF--1(f)...........
PERFORMANCE
Hydraulic Inlet Pressure Range 50 -- 2000 PSI (3.4 -- 138 bar)
Fluid Pressure Range 40 -- 1716 PSI (2.8 -- 118 bar).......
Max. Rec’d Cycles / Minute 50...
Displacement In
3
Per Cycle 59.79...
Volume / Cycle 33 oz. (979 ml).............
Cycles Per Gallon 3.86..........
Flow @ 50 Cycles / Minute 12.9 GPM (49.0 lpm)....
Noise Level N/A...............
PUMP DATA
Hydraulic Motor
61626--100
(SeeManual61626--100)
FIGURE 1
Material Outlet
1--1/4’’ NPTF--1(f)
95_FROMHYDRAULICINLET
Lower Pump
66941--XX3
(SeeManual6694X--X)
Hydraulic Inlet
1/2--14 NPTF--1(f)
Spacer Section
45-7/16
(1154mm)
14-25/32
(375mm)
30-5/32
(766mm)
Accessory Available:61938--1 WallBracket and65139 FloorMounting Flange.
CONNECTOR(See Figure2)
MODEL 650940-XX3
CAPSCREW Y6--130--C(3)
WASHERY14--750--K (3)
SPACERROD 93347--2 (3)
Material Inlet
2’’ NPTF--1(male)
CAPSCREW 79186(3)
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650940--X MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6694X--X LOWER PUMP END OPERATOR’S MANUAL
- 61626--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 99711103