Filter
Top Products
39
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen
Snapshot is enabled, but there is not a GPS receiver connected, pressing the MARK key
will capture the screen image but an error will display that says a GPS position fix is
required to create a waypoint.
To view saved screen snapshots from the Snapshot and Recording View:
1. Make sure that the optional-purchase MMC/SD card used to capture
the screen is installed in the card slot.
2. Press the VIEW key until you see the Snapshot and Recording View.
3. Press the UP or DOWN Cursor keys to scroll through the available
screen snapshot thumbnails and recording icons. The selected
thumbnail or icon will be highlighted with arrows. Press the RIGHT
Cursor key to view the full image.
• When you highlight a screen snapshot thumbnail, the amount of
space remaining on the MMC/SD card will be displayed in the
information box.
• A red border around the full screen indicates that the view is a
saved screen capture, not a “live” view.
• Press the DOWN Cursor key to view the next screen snapshot.
• Press the LEFT Cursor key to return to the Snapshot and Recording
View file list.
To view saved screen snapshots from a Chart View:
Waypoints created with a screen snapshot are displayed in Chart View as a
screen snapshot icon.
1. Make sure that the optional-purchase MMC/SD card used to capture
the screen is installed in the card slot.
2. Press the VIEW key until you see a Chart View.
3. Use the 4-WAY Cursor Control key to move the active cursor onto a
screen snapshot icon. When the cursor snaps onto the screen snapshot
icon, a thumbnail preview of the snapshot will be displayed on the
screen.
4. Press the INFO key to access the Waypoints Info Submenu.
Views