Filter
Top Products
158
Units - Depth
Units - Depth selects the units of measure for all
depth-related readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Units - Depth
setting. (Domestic Models: Feet, Fathoms; International Models:
Meters; Default = Feet/Meters)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related readouts.
International Models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Units - Temp setting.
(Celsius, Fahrenheit; Default = Celsius)
Units - Distance
Units - Distance selects the units of measure for all
distance-related readouts, and will appear in the menu if a Temp/Speed
Accessory is connected and the paddlewheel has moved at least once, or if the
GPS Receiver is connected.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Units - Distance
setting. (Domestic Models: Statute Miles, Nautical Miles, Default =
Statute Miles; International Models: Meters/Kilometers,
Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles,
Default = Meters/Kilometers)
Set Up Menu Tab