Humminbird 777C2 GPS Receiver User Manual


 
63
Select Readouts
(Advanced, Sonar view only)
Select Readouts sets individual digital readouts on the Sonar View. This
Advanced feature allows you to select what data will be displayed in each of 5
fixed-position data windows arranged around the left and bottom edges of the
Sonar View screen, or whether a particular window will be turned off,
displaying nothing in that area; you can access this menu choice only when in
Advanced User Mode (see Setup Menu Tab: User Mode).
Data windows can display readouts from
supported accessories such as Temp/Speed.
Each data window can either be empty or
contain one of the following:
Speed (will be displayed if a Temp/Speed
Accessory is attached and the
paddlewheel has moved at least once, or
if a GPS Receiver is connected)
Temperature (will display temperature
from the temperature probe that is built in
to the transducer)
Triplog (will be displayed if a Temp/Speed
Accessory is attached and the
paddlewheel has moved at least once, or
if a GPS Receiver is connected)
Voltage
Aux Temp (will display temperature from
an optional-purchase temperature probe
or Temp/Speed accessory)
Water Speed (will only be displayed if a
Temp/Speed Accessory is attached and the
paddlewheel has moved at least once).
Water Speed is not available with a GPS
receiver.
Select Readouts
531526-1_A - 747c_&_777c2_Man_Eng.qxp 10/2/2006 1:42 AM Page 68