Filter
Top Products
22 © 2003 Directed Electronics, Inc. Vista, CA
4. Program the feature: While HOLDING the Valet/program switch, you can toggle the feature
on and off using the remote transmitter. Pressing the button that locks the door will select
the one-chirp (default) setting. Pressing the unlock button will select the two-chirp setting.
NOTE: Feature 9 (Valet pulse count) has five possible settings. Pressing the unlock
button will toggle through all the possible settings.
5. Release the Valet/program switch.
ONCE THE FEATURE IS PROGRAMMED
■ Other features can be programmed.
■ The Learn Routine can be exited if programming is complete.
TO ACCESS ANOTHER FEATURE
After you have programmed a feature in Step 4 of the learn routine, press and release the Valet/program switch
the number of times necessary to advance from the feature you just programmed to the next one you want to
program. Then press the Valet/program switch once more and HOLD it. For example, if you just programmed the
third feature and you would like to program the seventh feature in the menu, you would: Press and release the
Valet/program switch four times. Then press it once more and HOLD it. The siren would chirp seven times to
confirm access to the seventh feature.
DEFAULT ONE-CHIRP SETTINGS TWO-CHIRP SETTINGS
FEATURE (PRESS TRANSMITTER LOCK BUTTON (PRESS TRANSMITTER UNLOCK BUTTON
NUMBER OR DOOR LOCK SWITCH) OR DOOR UNLOCK SWITCH)
1 Active Arming Passive Arming
2 Confirmation Chirps ON Confirmation Chirps OFF
3 Siren duration 30 seconds Siren duration 60 seconds
4 Instant door trigger delayed door trigger
5 Door trigger error chirp ON Door trigger error chirp OFF
6 Sensor shunt Zones 2 and 4 Sensor shunt all zones
7 Panic Mode enabled Auxiliary output enabled
8 No function
9 Valet switch input 1 pulse Valet switch input 2-5 pulses
NOTE: Factory defaults are indicated in bold type.