Filter
Top Products
© 2003 Directed Electronics, Inc. Vista, CA 15
H1/8 BLACK (-) CHASSIS GROUND CONNECTION
Remove any paint and connect this wire to bare metal, preferably with a factory bolt rather than your own screw.
(Screws tend to either strip or loosen with time.) We recommend grounding all your components, including the
siren, to the same point in the vehicle.
H1/9 YELLOW (+) IGNITION INPUT
Connect this wire to the (+)12V ignition wire. This wire must show (+)12V with the key in run position and during
cranking. Take care to insure that this wire cannot be shorted to the chassis at any point.
H1/10 BROWN (+) SIREN OUTPUT
Connect this wire to the red wire of the siren. Connect the black wire of the siren to (-) chassis ground, prefer-
ably at the same point that you connect the control module’s black ground wire.