Filter
Top Products
Your Excess Cargo Carrier can be loaded with up to 500 lbs. of cargo.
Caution: The load weight must be centered or evenly distributed across the Bed Frame (D).
Always use appropriate tie-down restraints to securely attach any cargo loaded onto the Excess
Cargo Carrier before moving your vehicle any distance. Do not leave loose items on the BED
FRAME while operating the vehicle.
DO NOT EXCEED THE MANUFACTURER’S RECOMMENDED PRODUCT WEIGHT
CAPACITY. Doing so can result in personal injury and/or damage to the product.
Caution: Be aware of dynamic loading! If the vehicle hits a bump, a slight play in the receiv-
ing hitch or a movement in the load could result in a momentary dynamic loading effect that
could dramatically increase the actual load weight. This momentary dynamic loading effect
could result in damage to the Excess Cargo Carrier, damage to the load and possible personal
injury.
Note: Any load over 350 Lbs. requires a Class 3 hitch on the vehicle.
(Class 2 Hitch = 350 Lbs. maximum tongue weight)
(Class 3 Hitch = 500 Lbs. maximum tongue weight)
PARTS LIST
Item# Description Qty Item# Description Qty
A Receiver Mounting Bar 1 E Hex Bolt M10 2
B Detachable Side Rail 2 F Nut M10 2
C1 Side Rail Brace 2 G Hex Bolt M6 16
C2 Side Rail Brace 4 H Nut M6 16
D Bed Frame 1
OPERATION
Step 1: Request a friend’s help to lift the Excess Cargo Carrier.
Step 2: Lift the Excess Cargo Carrier and place the RECEIVER MOUNTING BAR into the
Hitch Receiver mounted to your vehicle.
Step 3: Line up the horizontal hole in the RECEIVER MOUNTING BAR with the hole in your
Hitch. When the holes line up, place your locking mechanism through the holes to
secure the Excess Cargo Carrier.
Page 8 -- SKU: 34313 REV 09/02