Filter
Top Products
Step 4: Insert two HEX BOLTS (#E) through the top of the BED FRAME and down through the
RECEIVER MOUNTING BAR as shown in Figure 2.
Hex Bolts
(#E)
Nuts
(#F)
Figure 2 — Inserting Hex Bolts
Step 5: Attach a NUT (#F) to each of the HEX BOLTS and tighten.
Detachable Side Rails
The following Steps show how to assemble the DETACHABLE SIDE RAILS (#B). These side
rails should always be in place when using the Excess Cargo Carrier.
Page 5 -- SKU: 34313 REV 09/02
®