Filter
Top Products
Page 3SKU 98239 For technical questions, please call 1-800-444-3353.
Work area safety2.
Keep work area clean and well a.
lit. Cluttered or dark areas invite
accidents.
Keep children and bystanders b.
away while operating. Distrac-
tions can cause accidents.
Personal safety3.
Stay alert, watch what you are do-a.
ing and use common sense when
operating. Do not use while you
are tired or under the inuence of
drugs, alcohol or medication. A
moment of inattention may result in
serious personal injury.
Use safety equipment. Always b.
wear eye protection. Safety
equipment such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection used
for appropriate conditions will
reduce personal injuries.
Dress properly. Do not wear loose c.
clothing or jewelry. Keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewelry or
long hair can be caught in moving
parts.
Product safety4.
Maintain labels and nameplates a.
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
This product is heavy, and is not a b.
toy. Keep it out of reach of children.
The warnings, precautions, and instruc-
tions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE INSTRUCTIONS.
SPECIFICATIONS
Maximum Gross
Towing Weight
4,000 lb.
Maximum Tongue
Weight (For auxiliary
and towing receivers
combined)
400 lb.
Towing Receiver
Specications
2” Receiver, 2” x 6-1/2”
Auxiliary Receiver 2” x 7-1/2”
UNPACKING
When unpacking, check to make
sure that the item is intact and undam-
aged. If damage is found, please call
Harbor Freight Tools at the number shown
on the cover of this manual as soon as
possible.
INITIAL SET UP INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
ASSEMBLY
There is no assembly required for this
Dual Hitch Extension.