Harbor Freight Tools 96933 Automobile Accessories User Manual


 
Page 6SKU 96933 For technical questions, please call 1-800-444-3353.
BULB REPLACEMENT
Wear ANSI-approved safety goggles and heavy-duty work
gloves when replacing the bulb.
Make sure the burned-out bulb has cooled completely.
Gently pry off a lens covering the burned out bulb using plastic pry tools (not
included) to prevent damage.
Press the burned-out bulb into the socket slightly and rotate it counterclockwise
to release it. Remove the burned-out bulb.
Insert a new 12V/21/5W bulb into the socket and secure it by turning clockwise
while pushing it into the socket.
Note: The bulb has offset pins that allow it to be installed only one way. If it
does not properly and easily t into place, then turn it around.
Gently snap the lens back in place, and test the lights to ensure proper opera-
tion before use.
1.
2.
3.
4.
5.
6.
CAUTIONCAUTION
PARTS LIST
Part Description Q’ty
1 Amber Front Lens 2
2 Red Rear Lens 2
3 Bracket 2
4 Bulb 2
5 Socket 2
6 Threaded Shaft 2
7 Shell 2
8 Spring Washer 2
9 Flat Washer 2
10 Ground Terminal 2
11 Nut 2
12 Screw 2
Part Description Q’ty
13 Cover 2
14 Magnet 2
15 Nut 2
16 Screw 8
17 Power Cord 1
18 “Trailer” 4-way Flat Connector 1
19 Left-Right Cord 1
20 Bulb Wire 4
21 Wire Splices 4
22 Wiring Pigtail 1
23 “Trunk” 4-way Flat Connector 1
24 Protective Label 2
Note: Parts 21-23 not shown on diagram.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.