Harbor Freight Tools 96933 Automobile Accessories User Manual


 
Page 3SKU 96933 For technical questions, please call 1-800-444-3353.
Thoroughly test vehicle lights and tow lights before use.
Mount lights in proper orientation. Amber lights must face forward and red lights
must face backward. Improper orientation can confuse or distract drivers, caus-
ing a trafc hazard.
Install on a 12 V negative ground circuit only. Installing on different circuit can
result in electric shock, re, or property damage.
Turn off vehicle and set the parking brake before installation or use.
Do not use on marine trailers (such as boat trailers). Not waterproof.
Wear ANSI-approved impact safety goggles and heavy-duty work gloves during
installation and use.
Do not modify the Towing Light Kit and do not use the Towing Light Kit for a
purpose for which it was not intended.
Inspect before use; do not use if parts loose or damaged. Inspect wires and
connections for insulation damage or loose wires and repair before use.
People with pacemakers should consult their physician(s) before use. Electro-
magnetic elds in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
This product is not a toy. Keep it out of reach of children.
Check light position and function regularly when towing, especially on rough or
uneven surfaces, or in windy conditions. The magnets may loose their grip on
the vehicle under extreme circumstances.
Remove conductive articles (such as metal jewelry, watches, and other items)
before installing light kit. Conductive objects can cause an electrical short re-
sulting in re, property damage, or personal injury.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.