Filter
Top Products
Page 2SKU 95409
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Material Formed and welded flat steel stock
Weight Capacity 300 lb.
Ground Clearance 5-1/8” H
Swivel Casters Black poly-plastic w/ zinc plated steel frames.
Overall Dimensions 24-7/8” L X 31-7/8” W X 9-9/16” H
Wheel Dimensions 5” Dia. X 1” W
Carrying Handle Dimensions 2” L X 5-3/16” W X 3/8” T
Wheel Dolly Holders’ Dimensions 5/16” L X 1-5/8” W X 3-5/8” T
Net Weight 21.4 lb.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts and assembly dia-
gram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Write the product serial number in the back of the manual near the assembly
diagram, or write the month and year of purchase if the product has no serial number.
Keep this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
Wear proper clothing. Always use ANSI-approved safety impact goggles when
assembling or using this Wheel Dolly Stand/Holder. Wear long sleeved shirts,
long pants and steel-toed boots.
Keep work area clean and well lighted. A dim and/or cluttered work area in-
vites personal injury.
Keep children away from work areas. Children can be a distraction and should
be supervised by an adult when near the work area. Never allow children to
ride on, or play with this product.
Check for damaged parts. Before using this Wheel Dolly Stand/Holder, carefully
check for any parts that may be missing or damaged and any other conditions
that may affect the operation of this tool. Replace or repair damaged and worn
parts immediately using only a qualified repair facility.
Always use the proper tools. This Wheel Dolly Stand/Holder was designed
for a specific task. Do not alter this tool, or use it for a purpose to which it was
not intended.
Work safely. Do not use this Wheel Dolly Stand/Holder if under the influence
of alcohol or prescription drugs. Doing so could cause damage to the tool or
personal injury.
Never exceed the maximum weight capacity of 300 lb. BE AWARE OF DY-
NAMIC LOADING: If the Wheel Dolly Stand/Holder is dropped while loaded it
1.
2.
3.
4.
5.
6.
7.