Harbor Freight Tools 94564 Automobile Accessories User Manual


 
Page 15SKU 94564 For technical questions, please call 1-800-444-3353.
Connect the Brown Wire to the vehicle’s Left Tail Light by stripping, wrapping, and
taping the Connector Plug. (See Figure I.)
Connect the Yellow Wire to the vehicle’s Left Signal and Stop Light Wire.
(See Figure I.)
Connect the Green Wire to the vehicle’s Right Signal and Stop Light Wire.
(See Figure I.)
NOTE: Some foreign vehicles may require an adaptor to convert their 5-wire system
to a 4-wire vehicle Connector Plug. (See Figure I.)
Attach the White Ground Wire at the plug end of the Wiring Harness to the small
hole on the Coupler Base (6) with a 1/4” Tapping Screw (not included).
(See Figure I.)
Leave about 18” of wire beyond the Coupler (7). Then lay out the remaining wires
along the Connecting Rails (3L, 3R) and Left and Right Side Rails (1FL, 1FR, 1RL,
1RR). (See Figure I.)
Secure the wires to the Connecting Rails (3L, 3R) and Left and Right Side Rails
(1FL, 1FR, 1RL, 1RR), using the Clips provided. (See Figure I, Circle D.)
Connect the Wire Lead from the Side Running Light (24) on each side of the Trailer
to the Brown Wire of the Wiring Harness, using a Wire Connector.
(See Figure I, Circle E.)
Strip about 3/4” of the ends of the Yellow/Brown and Green/Brown wires.
(See Figure I.)
Make the following connections (per color code). (See Figure I, Circle C.)
Left Side Right Side
Yellow-Red Wire Green-Red Wire
Brown-Two Black Wires Brown-Two Black Wires
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.