Harbor Freight Tools 93229 Automobile Accessories User Manual


 
SKU 93228 / 93229 For technical questions please call 1-800-444-3353. Page 2
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model
______________ Serial No.____________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
The Flush Mount Tail Light provides stop, turn and tail light functions.
Technical Specifications
Technical specifications are the same for both #93229 and #93228.
Model 93229 has a red tail light; model 93228 has an amber tail light.
Overall Dimensions: 5-1/2” diameter x 2-1/4” Deep
Lens: 4” diameter
Construction: Housing is white ABS and Lens is acrylic.
Bulb (included): One dual filament P21/5W 12V; 21-5W (1016);
12499 Phillips
®
bulb. Bulb has two pins that are offset.
Housing rotates 360 degrees.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Keep work area well lighted.
3. Store idle equipment. When not in use, the Tail Lights must be stored in a safe and clean
location. Always lock up products and keep out of reach of children.
4.
Use the right product for the job. There are certain applications for which the Flush Mount
Tail Light was designed. Do not modify the Tail Light and do not use the product for a purpose for
which it was not intended.
5. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
6. Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
7. Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.
8. Use eye protection. Always wear ANSI approved impact safety goggles.