Filter
Top Products
Page 2
SKU 92923 For technical questions, please call 1-800-444-3353
Specifications
Item Description
Functions Remove and replace fluid from most types and models of
vehicle brake systems, Also removes trapped air.
Working Air Pressure 10 to 30 PSI; 40 PSI Max.; Consumption: 4.5 CFM@30 PSI
Air Inlet 1/4” – 18 NPT
Tank Fluid Capacity 1.32 Gallons (5.25 quarts)
Pressure Regulator Manual control dial, locking
Pressure Gauge 0~140 PSI, 20 PSI increments; within 20 PSI increments,
marked in 2 increments
Drain Tubes 2 – 12-1/2 (L) x 0.316 (dia.) inches clear polyurethane with
rubber bleeder adapter tip
Brake Fluid Filler Hose 10 feet, 3 inches (L) x ½ inch (dia.); reinforced polyurethane
with ball valve and quick coupler at one end
Overall Dimensions 11 (dia.) x 8.5 (H) x 6.5 (base dia.) inches
Overall height with handle: 18 inches
Collection Bottles 2 – 9 (H) x 4-3/4 (L) x 2-1/4 (W) inches; one quart each
Weight 19.6 lbs.
Accessories Master Cylinder Adapters kit: 11 adapters – for domestic
and import vehicles in plastic toolbox. See Parts List at the
end of this manual for details.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.