Harbor Freight Tools 68123 Automobile Parts User Manual


 
Page 11For technical questions, please call 1-800-520-0882.Vertical Engine
4. Grip the Starter Handle of the Engine loosely and pull it
gently until resistance is felt. Allow Cable to retract fully
and then pull it quickly. Repeat until the engine starts.
Note: Do not let the Starter Handle snap back against the
engine. Hold it as it recoils so it doesn't hit the engine.
5. Allow the Engine to run for several seconds.
Then, the Mower’s Throttle control can be
adjusted as desired for operation.
IMPORTANT: Allow the engine to run at no load
for a minute or two with no load after each
start-up so that the engine can stabilize.
6. Break-in Period:
a. Breaking-in the engine will help to ensure proper equipment and engine operation.
b. The operational break-in period will last about 3 hours of use. During this period:
Do not apply a heavy load to the equipment.
c. The maintenance break-in period will last about 20 hours of use. After this period:
Change the engine oil.
Under normal operating conditions subsequent maintenance follows the
schedule explained in the MAINTENANCE AND SERVICING section.
Stopping the Engine
To stop the engine, release the brake handle.
4
5
SAFETYOPERATIONMAINTENANCE SETUP