Harbor Freight Tools 68049 Automobile Parts User Manual


 
SKU 68048, 6049, 6056 For technical questions, please call 1-800-444-3353 Page: 3
7. Center the vehicle’s lifting point(s) on the saddle of the
jack stand(s). Set the jack stand(s) according to the
manufacturer’s instructions, making sure that they lock
securely into position.
Note: Always set both Jack Stands at the same height.
8. Slowly turn the Handle counterclockwise to lower the
vehicle onto the saddle(s) of the jack stand(s). Then,
turn the Handle rmly clockwise to close it.
Lowering
1. Carefully remove all tools, parts, etc. from under
the vehicle.
2. Position the Saddle under the lifting point. Turn the
Handle rmly clockwise and raise load high enough
to clear the jack stands, then carefully remove jack
stands.
3. Slowly turn the Handle counterclockwise (never more
than 1/2 full turn) to lower the vehicle onto the ground.
4. Lower the Jack completely. Then, store in a safe, dry
location out of reach of children.
Inspection, Maintenance, & Cleaning
Procedures not specically explained in this
manual must be performed only by a qualied
technician.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or
vibration occurs, have the problem corrected before further
use.
1. Before each use, inspect the general condition of the
Jack. Check for broken, cracked, or bent parts, loose
or missing parts, and any condition that may affect the
proper operation of the product. If a problem occurs,
have the problem corrected before further use.
Do not use damaged equipment.
2. Before each use, thoroughly test the Jack for proper
operation prior to its actual use. If the Jack appears
not to be working properly, follow Bleeding instructions
on page 2.
3. Change the hydraulic oil at least once every three
years:
A. With the Jack fully lowered, remove the Oil Filler
Plug on the side of the Housing.
B. Tip the Jack to allow the old hydraulic oil to drain
out of the Housing completely, and dispose of
the old hydraulic oil in accordance with local
regulations.
C. With the Jack upright, completely ll the Housing
with a high quality hydraulic oil (not included) until
the oil is 1/4″ below the ll hole.
D. Open the valve by turning the Handle
counterclockwise and pump the Handle to bleed air
from the system.
E. Recheck oil level and re-ll as needed.
F. Reinstall the Oil Filler Plug.
7. Wipe dry with a clean cloth. Then, store the Jack in
a safe, dry location out of reach of children and other
non-authorized people.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that
its products meet high quality and durability standards,
and warrants to the original purchaser that this product
is free from defects in materials and workmanship for
the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or
indirectly, to misuse, abuse, negligence or accidents,
repairs or alterations outside our facilities, criminal activity,
improper installation, normal wear and tear, or to lack of
maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use
of our product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must
be returned to us with transportation charges prepaid. Proof
of purchase date and an explanation of the complaint must
accompany the merchandise. If our inspection veries the
defect, we will either repair or replace the product at our
election or we may elect to refund the purchase price if we
cannot readily and quickly provide you with a replacement.
We will return repaired products at our expense, but if we
determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you
must bear the cost of returning the product.
This warranty gives you specic legal rights and you may
also have other rights which vary from state to state.