Filter
Top Products
Page 6SKU 66242 For technical questions, please call 1-800-444-3353.
Fig. 2
Set Screw
(2.5)
Completed Handle
4. Put the Handle Assembly into Handle
Socket and secure with Set Screw.
(See Fig. 2.)
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Disconnect the Bottle Jack
from its compressed air
supply source, and release
any compressed air from the
tool before performing any set
up and operating procedures.
Tool Set Up
Fig. 3
1. This Jack comes in two boxes and
easily connects to an air compressor.
For proper Jack/Air compressor con-
nection, see Fig. 3.
Incorporate an in-line oiler, shut-off 2.
valve, regulator with pressure gauge,
and lter for best service, as shown in
the diagram above. An in-line shut-
off valve is an important safety
device because it controls the air
supply even if the air hose is rup-
tured.
Note: If an automatic oiler system is not
used, add a few drops of Pneumatic
Tool Oil to the airline connection be-
fore operation. Add a few more drops
after each hour of continual use.
Attach an air hose to the compres-3.
sor’s air outlet. Connect the air hose
to the Air Valve Assembly (5) of the
Bottle Jack. Other components, such
as a connector and quick coupler, will
make operation more efcient, but
are not mandatory.
WARNING