Harbor Freight Tools 66242 Automobile Parts User Manual


 
Page 3SKU 66242 For technical questions, please call 1-800-444-3353.
b. Use safety equipment. Always
wear ANSI-approved safety impact
goggles and heavy-duty work
gloves. Safety equipment such
as non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c. Avoid accidental starting. Ensure
that the Lock Lever of the Air Valve
Assembly (5) is in the unlocked
position before connecting to an air
supply. Connecting this tool with
the Lock Lever engaged invites
accidents.
d. Stay out from under loads being
lifted, even loads held by jack stands
if possible.
e. Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
tool in unexpected situations.
f. Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry
or long hair can be caught in moving
parts.
Tool use and care
a. Do not force the tool. Use the
correct tool for your application. The
correct tool will do the job better
and safer at the rate for which it was
designed.
b. Do not use the tool if the Air Valve’s
on/off switch/valve does not operate
properly. Any tool that cannot
be controlled with its Air Valve is
dangerous and must be repaired.
c. Disconnect the air hose from the
tool and release any remaining
air pressure before making any
adjustments, changing accessories,
or storing the tool. Such preventive
safety measures reduce the risk of
starting the tool accidentally.
d. Store idle tools out of the reach of
children and do not allow people
unfamiliar with the tool or these
instructions to operate this tool.
Tools are dangerous in the hands of
untrained users.
e. Maintain this tool. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
tool’s operation. If damaged, have
the tool repaired before use. Many
accidents are caused by poorly
maintained tools.
f. Use the tool and its accessories in
accordance with these instructions
and in the manner intended for this
particular type of tool, taking into
account the working conditions and
the work to be performed. Use of
this tool for operations different from
those intended could result in a
hazardous situation.
Service
a. Have the tool serviced by a qualied
repair person using only identical
replacement parts. This will ensure
the safety of the tool is maintained.
Specic Safety Rules
Maintain labels and nameplates 1.
on the Bottle Jack. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a
replacement.