Open as PDF
250 LB. TRUCK
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
2008 by Harbor Freight Tools
rights reserved. No portion of this document or any
artwork contained herein may be reproduced in any
shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this document
may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the
product described herein. Tools required for installation
and service may not be included.
For technical questions or replacement parts,
please call 1-800-444-3353.
Weight Capacity 250 lb.
Arm Width 19”-34”
Rack Height 53”
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing or
broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
Follow DOT regulations regarding installation 1.
Verify that installation surface has no hidden 2.
utility lines before drilling or driving screws.
Install only according to these instructions. 3.
Improper installation can create hazards.
Wear ANSI-approved safety goggles and 4.
heavy-duty work gloves during installation.
Keep installation area clean and well lit.5.
Keep bystanders out of the area during 6.
Do not install when tired or when under the 7.
Do not exceed 250 lb. weight capacity, 1.
distributed evenly across both Frames. Be
aware of dynamic loading! Sudden load
causing product failure.
Strap ladder securely to rack.2.
When expanding the Arm (6), leave at least 3.
2.5” of the tube in the Frame (1).
Use as intended only.4.
Inspect before every use; do not use if parts 5.
loose or damaged.
Maintain product labels and nameplates. 6.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
Manual Revised 09b