Filter
Top Products
SKU 66183 For technical questions, please call 1-800-444-3353. Page 3
Dress properly. Do not wear c.
loose clothing or jewelry. Keep
your hair, clothing and gloves
away from moving parts. Loose
clothes, jewelry or long hair can be
caught in moving parts.
Only use safety equipment that d.
has been approved by an appro-
priate standards agency. Unap-
proved safety equipment may not
provide adequate protection. Eye
protection must be ANSI-approved
and breathing protection must be
NIOSH-approved for the specic
hazards in the work area.
Tool use and care3.
Do not force the tool. Use the a.
correct tool for your application.
The correct tool will do the job bet-
ter and safer at the rating for which
it was designed.
Store idle tools out of the reach b.
of children and do not allow per-
sons unfamiliar with it or these
instructions to operate the tool.
Tools are dangerous in the hands of
untrained users.
Maintain your tools. Check for c.
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may
affect the tool’s operation. If
damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
Use the tool in accordance with d.
these instructions, taking into
account the working conditions
and the work to be performed.
Use of the tool for operations differ-
ent from those intended could result
in a hazardous situation.
Farm Jack Safety Warnings
Be aware of dynamic loading!1. Sud-
den load movement may briey create
excess load causing product failure.
Use the Jack on solid, level surfaces, 2.
capable of supporting the weight of
the Jack, equipment being lifted, and
operator.
Do not exceed the lifting capacity 3.
(7,000 pounds) of the Jack.
Maintain labels and nameplates on 4.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
This product is not a toy. Keep it out 5.
of reach of children.
The warnings, precautions, and 6.
instructions discussed in this instruc-
tion manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and cau-
tion are factors which cannot be built
into this product, but must be supplied
by the operator.