Filter
Top Products
SKU 40312 Page 4
Unpacking
When unpacking, check to make sure the following parts are included.
1) Air Filter / Regulator 2) Lubricator 3) Double-sided Fitting
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual.
Installation
The diagram below shows the general connections for the Air Filter-Regulator and
Lubricator.
1. Find the 1/4 inch, double-sided Fitting (27) and apply brass fitting compound
to both sides.
2. Hand screw the Fitting into the Air Filter Body (12), right input side.
3. Take the Lubricator Body (A7) and align its output connection to the Fitting
and hand screw the Fitting a few turns into the Lubricator Body.
Regulator Spring (14) button
Fitting (27)
Lubricator Body (A7)
Air Filter Body (12)
Air Flow (from
Compressor)
To Air Tool
Pressure Adjusting
Knob (3)
Holder (6)
Screw (1)
Metal Bowl Guard (A15)
Metal Bowl Guard (26)
Quick Release Button
Quick Release Button