Grizzly H8366 Automobile Parts User Manual


 
MODEL H8366/H8367
JACK STANDS
INSTRUCTION SHEET
Operation Instructions
1. 

a. OFF
b. 
c.       

d. 

e. 
       

2. 
        
       
        
       
        

3. 




        

       

To reduce the risk of death, serious person-
al injury or property damage when using
these jack stands:
DO NOT overload these jack stands
beyond their rated capacities. The rated
capacity is for a matched pair of jack
stands with an evenly distributed, ver-
tically applied load. Overloading may
result in personal injury or property
damage.
Use caution when entering a vehicle
supported by jack stands. Never allow
others to enter a supported vehicle
while anyone is working underneath.
Only use these jack stands on a hard
level surface capable of sustaining the
load being supported.
Only use the jack stands at appropriate
points on the vehicle that can safely
support the vehicle's weight.
Always make sure that vehicle load
points are centered in the saddle and
that all four corners of the jack stand
are firmly on the ground.
Always apply the parking brake, and
use wheel chocks against the tires to
prevent accidental rolling.
Keep as much of your body as possible
out from underneath the vehicle when
placing or removing the stands.
 Never modify, weld or alter these jack
stands.
Never release a jack stand when it is
supporting a load.
Only use these jack stands to support
one end of a vehicle, not a side.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

H8366 Specifications
 


H8367 Specifications
 

