Grizzly H8090 Automobile Parts User Manual


  Open as PDF
of 4
 
MODEL H8090
2 Ton
Mini Aluminum Jack
COPYRIGHT © DECEMBER, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JC8821 PRINTED IN CHINA
Specifications
Maximum Lifting Capacity ............................ 4000 lbs.
Lifting Range ............................................. 5
7
⁄16"–13
7
⁄8"
Weight .............................................................. 21 lbs.
Identification
Figure 1 shows the main parts of the jack.
Figure 1. Model H8090 Identification.
Figure 2. Pump control knob, pump arm notch and
pump arm socket.
Carrying
Handle
Saddle
If you need help with the Model H8090, call our
Technical Support line at: (570) 546-9663.
1. ALWAYS support the vehicle with appropri
-
ately rated support stands before using this
jack.
2. Only use this jack on hard level surfaces
such as concrete or asphalt.
3. DO NOT overload this jack beyond the
maximum lifting capacity. Overloading can
cause the jack to collapse.
4. DO NOT use this jack to move a vehicle.
This jack is designed for lifting only.
5. Keep fingers and hands away from pinch
points when lowering
6. Always block vehicle wheels before using
this jack.
Pump Control
Knob
Pump Arm Notch
Machine
Label
Pump Arm
Socket
Failure to follow these instructions could result
in serious personal injury or death:
To raise the saddle:
Fit the pump arm notch over the pump con-
trol knob and turn the knob clockwise until it
stops, then put the pump arm into the socket
and move the arm up and down (Figure 2
).
To lower the saddle:
Fit the pump arm over the control knob and
slowly turn the knob counterclockwise.
Operation
next