Garrett Metal Detectors LS Radar Detector User Manual


 
14
BASIC OPERATING INSTRUCTIONS
Discrimination Adjustment
Used to set the desired level of discrimination.
(Figure 15.)
The following procedure shows how easy it is to
operate the Infinium LS.
1.  Turn On/Battery Test:
Turn the detector on and note the results of the
battery test represented by a range of one to four
beeps. Four beeps indicate the batteries are full. One
beep indicates they need to be replaced within one to
two hours. However, because of internal voltage regu-
lation circuitry, the detector will maintain total operat-
ing power and performance until the batteries are fully
depleted.
Scan a metal object to confirm detection. If the
detector fails to operate, verify that the battery pack
and batteries are aligned properly.
2.  Selecting Automatic Ground Track Setting:
Knowing the conditions of your search area will
help you choose the Automatic Ground Track setting
that will best suit your needs.
Initially select the Lock position using the rotary
power switch. Operating in the Lock position is