Filter
Top Products
GP-36 DGPS NAVIGATOR
GP-31 GPS NAVIGATOR
Operator's Guide
The purpose of this operator's guide is to provide the basic operating procedures for this equipment.
For detailed information, refer to the operator's manual.
Selecting Display Mode
Press the [DISP] key until desired display mode
appears.
[Nav Data Display]
2D
10–APR–99 15:37:40
SPD:
kt
CSE:
34°44. 000' N
135°21. 000'
E
[Highway Display]
CSE
BRG
RNG
SPD
0.5
XTE
0.05
242°
0.05 0.05
17.5
004
n
m
[Plotter Display]
2D
[ 5 ]
n
m
SPD:
10.0
k
t
34°44.000N 135°21.000E
X
2D MAG
15:37
NE
30 60
300 330
SPD:
kt
CSE:
RNG:
BRG:
TTG:
ETA:
1H30M 12:30
17.5 nm
242°
[Steering Display]
2D
10–APR–99 15:37:40
PWR
24.0
v
SPD
10.0
kt CSE
357°
(Display format
depends on user setting.)
[User Display: Speedometer]
OR
PWR
24.0
v
SPD
10.0
CSE
357°
TRIP 0.00 nm
30
40
50
60
10
20
0
CURSOR
[User Display: Digital Data]
[+]
n
m
k
t
k
t
2D
15: 37: 40
a
(Display format
depends on user setting.)
10.0 357°
CSE:
357°
357°
10.0
10.0
357
°
Enlarging, Shrinking the
Display Range
1. Press the [MENU] key.
2. Press the [ENT] key.
3. Press ▲ to increase; ▼ to decrease.
4. Press the [ENT] key to close the window.
Shifting the Cursor,
Display
1. On the plotter display, press the cursor pad
to turn on and shift the cursor.
2. Place the cursor on an edge of the screen
and use the cursor pad to shift the display.
Centering Own Position
1. Press the [MENU] key.
2. Select “SHIP TO CENTER?”.
3. Press the [ENT] key.
Entering MOB Mark
1. Press the [MARK/MOB] key.
2. Select “MOB?”.
3. Press the [ENT] key.
4. Press the [ENT] key again.