Furuno FAR-2XX7 Radar Detector User Manual


  Open as PDF
of 4
 
FAR-2xx7 SERIES MARINE RADAR
Operator’s Guide
The purpose of this Operator's Guide is to provide the basic operating procedures for this equipment. For
more detailed information, see the Operator's Manual. This manual describes operating procedures using
the trackball module, since it is common to both types of control units.
ACQ
ON
MENU
OFF
VRM
A/C SEAA/C RAIN
MODE
3
LINE
INDEX
6
OFF
21
HL
CENTER
OFF
45
RESET
CU/TM
OFFSET
EBL
GAIN
TARGET
CANCEL
TARGET
DATA
RANGE
-
+
LIST
TARGET
9
ENTER
MARK
TIME
VECTOR
78
CANCEL
TRAILS
0
MODE
VECTOR
BRILL
BRILL
EBL
F1
OFF
F2
ON
ACK
ALARM
F3 F4
STBY
TX
Trackball
Module
F1
F3
F4
F2
Trackball
Module
RCU-014 RCU-015
Control Description
POWER Turns the system on and off.
EBL and VRM controls Adjust EBL and VRM, respectively.
EBL ON, EBL OFF Turns the EBLs on and off, respectively.
VRM ON, VRM OFF Turns the VRMs on and off, respectively
F1-F4 Execute menu short cut assigned.
ALARM ACK Silences audible alarm.
STBY TX Toggles between stand-by and transmit.
BRILL Adjusts screen brilliance of FURUNO-supplied monitor.
A/C RAIN Suppresses rain clutter.
A/C SEA Suppresses sea clutter.
GAIN Adjusts sensitivity of the radar receiver.
HL OFF Temporarily erases the heading line while pressed.
EBL OFFSET Enables, disables the EBL offset. Switches coordinate polarity (menu operation).
MODE Chooses presentation mode.
OFF CENTER Shifts own ship position.
CU/TM RESET Moves own ship position in 75% radius in stern direction.
Resets the heading line to 0° in course-up and true motion modes.
INDEX LINE Turns index lines on and off.
VECTOR TIME Chooses vector time (length).
VECTOR MODE Chooses vector mode, relative or true.
TARGET LIST Displays ARP target list.
CANCEL TRAILS Cancels all target trails. In menu operation it clears line of data.
BRILL/O Chooses color scheme.
ENTER MARK Enters marks; terminates keyboard input.
MENU Opens and closes the MAIN menu; closes other menus.
ACQ - Acquires a target for ARP.
- Changes a sleeping AIS target to an activated one.
RANGE Chooses radar range.
TARGET DATA Displays target data for ARP or AIS target chosen with the trackball.
TARGET CANCEL Cancels tracking on ARP, AIS or reference target chosen with the trackball.
next