Filter
Top Products
• Lift the front end of the vehicle.
• Slide the tabbed end of the steering column through the
slot in the upper steering linkage and out through the
hole in the vehicle body.
• Insert the curved end of the steering column into the
hole in the lower steering linkage.
Steering
Column
Lower
Steering
Linkage
Hole
Upper
Steering
Linkage
Hole
Assembly
• Press firmly on the back of the cowling to snap the rear
tab into the slot in the vehicle body.
T
M
PRESS HERE
To Snap Side Tabs
PRESS HERE
To Snap Rear Tab
• Press firmly on each side of the cowling to snap the
four side tabs into the slots in the vehicle body. Make
sure the rear tab stays aligned with the slot.
Note: You may need to flex the shifter to the side to fit the
cowling over the high speed lock-out screw.
12
12
11
10
Steering
Column
Cap Nut
• Fit a .437 cap nut on the curved end of the
steering column.
•Tap the cap nut with a hammer to secure it to the
steering column.
Hint: You may want the help of another person to
support the steering column while you tap the cap
nut with the hammer
•Position the vehicle body upright.
13
Slot