Filter
Top Products
Assembly
• Lift the front end of the vehicle.
• Fit the straight end of the steering column through the
upper hole in the steering linkage and out through the
hole in the vehicle body.
• Fit the hooked end of the steering column through the
lower hole in the steering linkage.
• Lower the front end of the vehicle.
F
• Remove the tape that is attached to the steering wheel
and the vehicle frame.
• Position the steering wheel so that the arrow points to the
front end of the vehicle.
• Fit the steering wheel onto the end of the steering column.
• Fit a cap nut onto the end of the steering column.
Tap the cap nut with a hammer to secure it to the
steering column.
Hint: You may need the help of another adult to
support the other end of the steering column.
• Pull on the cap nut to be sure it is secure.
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle’s unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
WARNING
9
1
2
3
Steering Linkage
Hooked End of
Steering Column
Front End of Vehicle
Steering
Column
Steering
Wheel
Cap Nut
Arrow Points to Front End
Steering
Column
Straight End
of Steering
Column
76790pr-0920 5/1/02 8:30 AM Page 9