Fisher-Price 76790 Motorized Toy Car User Manual


 
Assembly
• Loosen the screw in the action sounds box battery
compartment door.
• Remove the battery compartment door.
• Insert three alkaline "AA" (LR6) batteries, as indicated
inside the battery compartment.
Hint: We recommend the use of alkaline batteries for
longer battery life.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
• Test to be sure the action sounds box functions
correctly. Press the buttons and listen for sounds. If
there are no sounds, simply remove and replace the
batteries. Make sure you do not press the buttons while
replacing the batteries.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use.
Always remove exhausted batteries from the toy. Battery
leakage and corrosion can damage this toy. Dispose of
batteries safely.
• Do not dispose of batteries in a fire. The batteries may
explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as
recommended in the instructions are to be used.
• If removable rechargeable batteries are used, they are
only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy
before they are charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure and
other parts. Do not use a damaged battery charger until
it has been properly repaired.
• When sounds become faint, or there are no sounds at
all, it’s time for an adult to change the batteries.
• Fit and "snap" the steering wheel cover into the center
of the steering wheel.
• Position the actions sounds cover so that the two tabs
are down.
• Fit the key knob into the right hole in the action sounds
box cover, as shown.
• Fit the sounds knob into the left hole in the action
sounds box cover, as shown.
• Insert a #6 x
3
/
8
" screw through the back of the action
sounds box cover and into each knob. Tighten the
screws with a Phillips screwdriver. Do not over-tighten.
10
4
5
6
Steering Wheel Cover
Sounds
Knob
Key
Knob
Action Sounds
Box Cover
Battery
Compartment
Door
Tabs
Shown Actual Size
1.5V x 3
“AA” (LR6)
IMPORTANT! Do not press the buttons on the
action sounds box when installing the batteries.
76790pr-0920 5/1/02 8:30 AM Page 10