Fisher-Price 74460 Motorized Toy Car User Manual


 
Hood
Tabs
Slot
Slot
Position the hood over the front of the vehicle body.
Insert the tabs on the hood into the slots in the
vehicle body.
Lights and
Siren Cord
Microphone
Cord
Align the arrow on the lights and siren cord connector
with the arrow on the microphone cord connector.
Push to connect the lights and siren cord to the
microphone cord.
21
22
Lights and
Siren Cord
Cord Retainer
Microphone
Cord
Battery
Compartment
23
Remove the backing from the cord retainer. Discard the
backing.
Apply the cord retainer to the battery compartment wall,
near the hole in the rear wall of the dash as shown.
Fit the microphone cord into the clip on the cord retainer.
Close the hood.
Assembly
17
Lights and Siren
Battery
Compartment
Front of Hood
Lights and
Siren Cord
20
Insert the lights and siren cord through the hole in the
center of the hood.
Fit the lights and siren to the top of the hood. Make sure
the battery compartment faces the front of the hood.
Insert two #6 x
7
/
16
" screws with washers through the
holes in the underside of the hood and into the lights and
siren. (The #6 x
7
/
16
" screws and #6 washers can be found
in the small parts bag enclosed with the lights and siren
and microphone.)