Filter
Top Products
9
6. OSD Functions
OSD Menu Structure
• OSD Access
To access OSD menu unscrew cover plate on rear
of camera, press “in” on joystick to access OSD Menu
.
• MODE
- INSTALLATION
Installation Mode provides a bright video
screen to adjust angle and focus.
- LICENSE-PLATE
License-plate Mode provides high
contrast and clear license plate image
for license plate capture.
• SHUTTER
1/250, 1/500, 1/1,000 ~ 1/10,000.
(After 1/1000sec, 1/500sec unit adjustment )
- Adjusted when LICENSE-PLATE MODE is performed.
(Initial value: 1/250)
- Indicated “---” when INSTALLATION MODE is set.
* Depending on the vehicle speed, you may adjust camera SHUTTER SPEED
• FREEZE
The video screen will automatically go
in to FREEZE mode when Camera is
triggered by sensors connected to the
trigger input.
User can set the freeze time to 3, 5, or 10 sec.
• NEGATIVE
User can select positive or negative image.
Negative OFF
Negative ON
SETUP
▶
MODE
SHUTTER
FREEZE-TIME
NEG. IMAGE
EXIT
LICENSE-PLATE
1/250
5SEC
OFF
SETUP
▶
MODE
SHUTTER
FREEZE-TIME
NEG. IMAGE
EXIT
LICENSE-PLATE
1/250
5SEC
OFF
SETUP
▶
MODE
SHUTTER
FREEZE-TIME
NEG. IMAGE
EXIT
LICENSE-PLATE
1/250
5SEC
OFF
SETUP
▶
MODE
SHUTTER
FREEZE-TIME
NEG. IMAGE
EXIT
LICENSE-PLATE
1/250
5SEC
OFF