EverFocus ez-platecam-002 Automobile Electronics User Manual


 
8
5. Installation
• CONNECTIONS
DUAL(DC12V/AC24V)
When you install the camera, please seal the end of cable to
protect the camera connections from humidity problems.
DC12V/AC24V
BNC FEMALE
VIDEO IN
WHITE: TRIGGER SIGNAL
BLACK: TRIGGER GROUND
VIDEO IN
TEST CABLE
Note: Face of connector with color mark should
face “up” when inserting test cable.
VIDEO TEST POINT
CONNECTION
OSD CONTROL
DVR OR
OTHER CCTV
EQUIPMENT
Power Supply
24VAC 300 mA min ; 500 mA Recommended
12VDC 600 mA min ; 1A Recommended
HANDHELD