Filter
Top Products
To ensure that the suction
cups adhere to the windshield
firmly, be sure to keep both
your windshield and the
suction cups clean.
WARNING
ESCORT CANNOT ANTICIPATE THE MANY WAYS SOLO CAN BE
MOUNTED. IT IS IMPORTANT THAT YOU MOUNT SOLO WHERE IT
WILL NOT IMPAIR YOUR VIEW NOR PRESENT A HAZARD IN CASE OF
AN ACCIDENT.
For optimum detection performance, we recommend the following:
•
Using the Windshield Mount, mount SOLO relatively level and high
enough on your front windshield to provide a clear view of the road
from the front and rear.
•
Mount SOLO away from windshield wipers, other solid objects and
heavily tinted areas that might obstruct the radar antenna or laser lens.
•
Keep the laser lens at the rear of SOLO clean. To clean, apply a small
amount of eyeglass cleaning solution with a soft cloth.
Mounting SOLO to Your Windshield:
SOLO’s patented EasyMount windshield bracket is designed for
unobtrusive and hassle-free mounting.
1 Insert each suction cup into large end of bracket hole and rotate cup
outward, locking into place.
2 Depress the adjustment button on the top of SOLO and slide
EasyMount bracket into the slot until mount is locked into the position
which best fits the angle of your windshield. (For extremely horizontal
or extremely sloped windshields, the EasyMount bracket can be bent.)
3 Mount SOLO on your windshield. Use the adjustment button to slide
SOLO forward or backward to a horizontal position. WHEN
ADJUSTED PROPERLY AND TO MINIMIZE BOUNCING, THE BACK
TOP EDGE OF SOLO SHOULD REST SOLIDLY AGAINST YOUR
WINDSHIELD.
CAUTION!
Some windshields have an “anti-lacerative” coating. Use of suction cups
could permanently mar the coating. Consult your dealership or the
vehicle’s owner’s manual to determine if your windshield has this coating.
M O U N T I N G S O L O
M
OUNTING
SOLO
3