Filter
Top Products
An optional AC adapter (model number: SFAC04) can
be purchased separately.
SF-110
What’s in the box
Cradle
Quick Start Guide
GPS Sports Monitor
Charge this product before using it for the rst time.
1. Connect the cradle to a power source.
• Using a PC
Connect the cradle’s USB plug to the computer’s USB port.
Do not use a USB hub. Instead, connect the cradle directly to the computer.
• Using the optional AC adapter
Connect the cradle’s USB plug to the AC adapter’s USB port.
We recommend using the optional AC adapter (model number: SFAC04). If you do not use a
supported AC adapter, you may not be able to charge the product or it may not operate
correctly.
2. Place the product into the cradle.
Check that the contact points on the SF-110 are pointing up and match the contact marks on
the cradle. After placing the SF-110 into the bottom of the cradle with the LCD screen facing
out, push carefully on the top of the product until it clicks into place.
Contact marks
When the product is placed correctly, the alarm sounds, the charging screen is displayed, and
charging starts.
3. When charging is complete, remove the product from the cradle.
Hold the cradle and press down on the SF-110 to release it.
4. Follow the on-screen instructions to set the language, units, and user information.
5. When you are in a location with no obstructions overhead, select Yes.
A signal is received from the GPS and time is automatically synchronized.
When you do not use the product for a while, it enters sleep mode and the time display turns o. The
display will turn back on the next time you move the product. If time synchronisation fails, the time screen
will automatically be updated the next time a GPS signal has been received.
6. Install the Epson Run Connect software.
• If you have a Windows® PC:
See section 2, “Using Runsense View (Windows PC).” The PC connection provides the fastest
and easiest data transfer from the SF-110.
• If you don’t have a Windows PC:
See section 3, “Using the Epson Run Connect app” for instructions on using the SF-110 with
your iOS or Android™ device.
1. Charging and setup
Creating an account
1. Connect the cradle to the PC using t he USB cable.
2. Place the product into the cradle.
Check that the contact points on the product are pointing up and match the contact marks on
the cradle. Epson Run Connect starts.
3. Click Create Account and enter your details.
Uploading your data
Connect your RUNSENSE product to the PC. The following box automatically appears.
Enter your Login ID and Password and click Upload.
Viewing your data
1. Click Start RUNSENSE View on the Run Connect screen to launch the web portal.
Or visit https://go-wellness.epson.com/runsense-view/.
2. Click the data you want to check from the list.
For information on using RUNSENSE View, see the RUNSENSE View Help.
NOTE
Installing Epson Run Connect software
This product allows you to manage measured data using the RUNSENSE View web app. To upload
measurement data, you need to install Epson Run Connect on your Windows PC and connect to the
Internet.
Install Epson Run Connect before connecting the product to your PC.
1. Visit epson.com/support/sf110 (U.S.) or epson.ca/support/sf110 (Canada) and
download Epson Run Connect PC.
2. Run the downloaded le and follow the instructions displayed on the setup
screen.
2. Using RUNSENSE View (Windows PC)
NOTE
NOTE
Your RUNSENSE product is made from materials commonly used in watches and other consumer
products. Since you may wear your product over extended periods, including when you are exercising
and sweating, it is important that you take care of your skin and your product according to these
instructions. Prolonged wearing of your product without proper care could lead to skin irritation or rash.
Please follow the precautions below to ensure full enjoyment and benet of your RUNSENSE product:
• Keep RUNSENSE and skin clean.
• Keep RUNSENSE and skin dry.
• Give skin a rest and some air.
Proper wear and care of your SF-110 is an important part of your enjoyment of this product. Make sure
to see the online User Manual for more detailed information on caring for your product.
Safety instructions
The following symbols are used in this guide to indicate possible dangerous operations or handling.
Make sure you understand these warnings before using the product.
Warning
This symbol indicates information that, if ignored, could possibly result in
serious personal injury.
Caution
This symbol indicates information that, if ignored, could possibly result in
personal injury or damage the product.
This symbol indicates an action that should be done.
This symbol indicates an action that must not be done.
Notes on using the product and components
Warning
Exercise according to your physical capabilities.
Stop exercising and consult your doctor if you feel unwell during exercise.
This product is not intended for use to diagnose, prevent, or treat disease or other conditions, and
is not a medical device. If you have any concerns, consult your doctor before using this product.
Do not use or store this product in the following environments. It may cause an electric shock or
re, or the product may malfunction or be damaged.
• Locations with very high or low temperatures or humidity
• Near volatile substances
• Dusty places
• Near a strong magnetic eld (for example, near a loudspeaker)
Do not disassemble this product, and do not attempt to repair this product by yourself. It may
cause an electric shock or accident.
Do not leave this product within reach of young children.
WARNING: The cradle cords included with this product contain chemicals, including lead, known
to the State of California to cause birth defects or other reproductive harm. Wash hands after
handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety code §
25249.5 and following.)
Caution
Persons with high skin sensitivity, eczema, allergies, or asthma may be more likely to experience
skin irritation or an allergic reaction from the Runsense product or similar products. Even persons
without such conditions may start to experience redness or skin irritation on wrists from prolonged
use or if the product is not cleaned regularly. If you experience such symptoms:
• Stop wearing and remove your product immediately. Do not put it back on.
• If symptoms persist for more than 2-3 days after removing the product, consult a dermatologist.
• Make sure to follow the wear and care instructions above and in the online User Manual.
Caring for your SF-110
Installing Epson Run Connect
Download and install Epson Run Connect from your mobile device's app store. You can use the app to
upload and monitor your measurement data from your mobile device.
The following mobile devices are supported:
• iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6, and iPhone 6 Plus with iOS 6 or later.
• Mobile products running Android 4.3 or later with Bluetooth® Smart.
Pairing your product
1. Start the Epson Run Connect app on your mobile device.
2. Tap Pairing.
3. Tap Start Pairing.
4. Press on the SF-110's Time screen to display the Menu screen.
5. Press / to highlight Smart Phone, then press .
6. Press / to highlight Connect, then press .
7. Tap OK on your mobile device.
Your product displays a passcode.
8. Enter the 6-digit passcode on your mobile device and tap OK or Pair.
9. Tap OK to nish pairing.
For more information on using the Epson Run Connect app, see the online iOS or Android user manual.
3. Using the Epson Run Connect app
NOTE
NOTE
When Complete is
displayed, press .
Scroll up
Scroll down
Set your height,
weight, DOB,
gender, today's
date, and the date
format.
Select the
highlighted
option
Record laps while measuring
Change between screens
Turn light on/o
Start, stop, or resume recording
1. Press on the Time screen to display the Menu screen.
2. Presss / to highlight Workout, then press .
3. Press on the Measurement screen to start measuring.
4. To record a lap, press while measuring.
5. Press again to stop measuring.
6. Press while measuring is stopped to display the Measure Menu screen.
7. Press / to highlight Stop Workout, then press .
Measurement data is saved in the product's memory, and you are returned to the time screen.
• The Measurement function is composed of three screens, and you can change the screen display by
pressing . You can change the content displayed on screens 1 to 3 by adjusting Measure Set > Screen.
For more details, see the online User Manual.
• If no operations are performed for 60 minutes on a screen other than the measurement screen, the time
screen is displayed.
• You can change the following settings from Menu > Settings > Measure Set.
AT Lap function: Automatically measures laps when running a distance set in advance.
AT Pause function: Measuring is automatically paused when you stop running and resumes when you start
running again.
Lap Number
Lap Distance
Lap Time
NOTE
Use / to scroll
This function allows you to measure split times and lap times simultaneously.
You can record laps by pressing button on the product during Chronograph measurement.
Using the chronograph
Start
Split Time
Measures the elapsed time from the start.
Lap Time
Records the elapsed time for each lap.
TM