Filter
Top Products
36
Reference Manual
00809-0700-4530, Rev AA
Section 3: Commissioning
September 2013
Commissioning
3.2 Introduction
The transmitter installation should be carried out as described in the Quick Installation Guide
that is enclosed with every transmitter. Even though the transmitter may be installed on the
bench, it must be configured to the actual process conditions. For the Rosemount GWR
transmitters, it is important not to bend the probe during any part of the installation. It may be
necessary to shorten the probe, mount a centering disk, or anchor the probe during the
mechanical installation. For more information, see the Rosemount 3300 and 5300 Reference
Manuals (Document No. 00809-0100-4811 and 00809-0100-4530).
For the Rosemount 5300 Series with QS Prior-Use option in Safety Instrumented Systems (SIS)
refer to the Quick Installation Guide (Document No. 00825-0100-4530) and the Reference
Manual (Document No. 00809-0100-4530) for instructions. Beside these required steps, the
procedures below are recommended as best practices.
Recommendations for grounding are available in the Grounding Best Practices and Transient
Protection for Rosemount Radar Transmitters Technical Note (Document No.
00840-2700-4811).
3.3 Functions of procedures to include during
commissioning process
Table 3-1. Chamber installations
Table 3-2. Tank installations
Function Rosemount Series
Trim Near Zone (TNZ) Rosemount 3300 Series
Rosemount 5300 Series
Upper Null Zone (UNZ) All
Setting range values All
Remote housing Rosemount 5300 Series
Static Vapor Compensation (SVC) Rosemount 5300 Series
Dynamic Vapor Compensation (DVC) Rosemount 5300 Series
Signal Quality Metrics (SQM) Rosemount 5300 Series
Safety Instrumented Systems (SIS) Rosemount 5300 Series
(1)
(1) See the Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530).
Function Rosemount Series
Trim Near Zone (TNZ) Rosemount 3300 Series
Rosemount 5300 Series
Upper Null Zone (UNZ) All
Measure and learn Rosemount 5400 Series
Configuration for process conditions All
Signal Quality Metrics (SQM) Rosemount 5300 Series
Rosemount 5400 Series
Safety Instrumented Systems (SIS) Rosemount 5300 Series
(1)
(1) See the Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530).
Store backup All