Filter
Top Products
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 312° Exhaust 322°
Duration at .050" Lift: Intake 234° Exhaust 244°
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .562" Exhaust .588"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 59° BBDC 5° ATDC
Centerlines: Intake: 107°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 312° Exhaust 322°
Duration at .050" Lift: Intake 234° Exhaust 244°
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .562" Exhaust .588"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 59° BBDC 5° ATDC
Centerlines: Intake: 107°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 312° Exhaust 322°
Duration at .050" Lift: Intake 234° Exhaust 244°
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .562" Exhaust .588"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 59° BBDC 5° ATDC
Centerlines: Intake: 107°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 312° Exhaust 322°
Duration at .050" Lift: Intake 234° Exhaust 244°
Lift at cam: Intake .325" Exhaust .340"
Lift at valve: Intake .562" Exhaust .588"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 59° BBDC 5° ATDC
Centerlines: Intake: 107°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07