Filter
Top Products
Catalog #7564
Rev. 7/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0394Page 1 of 2
PERFORMER RPM AIR-GAP 351-C INTAKE MANIFOLD
For 351 c.i.d. Ford Cleveland Engines
Catalog #7564
INSTALLATION INSTRUCTIONS
®
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,
it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:
1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at Edelbrock@Edelbrock.com
.
IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation
will void your warranty and may result in poor performance and engine or vehicle damage.
DESCRIPTION: The Edelbrock Performer RPM Air-Gap intake manifold is designed for high performance 351 c.i.d. Ford Cleveland engines operating
in the 1500 to 6500 rpm range. Port exits are matched to 2V cylinder heads and the intake to cylinder head flanges are large enough to seal on 4V
cylinder heads. The manifold will operate on both 2V and 4V applications. For 4V applications, no further port matching is recommended. Match the
RPM Air-Gap intake manifold with other components designed to operate in the 1500 to 6500 rpm range for best results.
• ACCESSORIES & INSTALLATION ITEMS: Major recommendations are listed below. See our catalog for details. To order a catalog, call (800)
FUN-TEAM, or visit www
.edelbrock.com.
• EGR SYSTEMS: Intake manifold will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on most 1972 and later
model vehicles. Check local laws for requirements.
• CARBURETOR RECOMMENDATIONS:
NOTES: Carburetor size (CFM) should be selected based on your specific engine combination. Consult your engine builder or contact our Technical
Hotline at: 1-800-416-8628 for assistance. Carburetors require a #8008 or #8024 stud, washer and nut kit; determine proper length based on
gasket thickness and your accessory mounting requirements (See catalog for details). If a manual choke Performer Series Carburetor is used and
electric choke is desired later on, Performer Series carburetors can be converted to electric choke using Electric Choke Kit #1478. Manual choke
Thunder Series carburetors CAN NOT be converted to manual choke.
CARBURETOR CHOKE TYPE PARTS REQUIRED FOR INSTALLATION
Performer #1407 (750 cfm) Manual #1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1411 (750 cfm) Electric #1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1412 (800 cfm) Manual #1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
Performer #1413 (800 cfm) Electric #1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1812 (800 cfm) Manual #1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
Thunder Series #1813 (800 cfm) Electric #1493 or 1847 throttle plate kit, #1483 or 1844 throttle lever adapter
• THROTTLE BRACKETS: The throttle and kickdown bracket on some vehicles may require modification to fit. When using Edelbrock carburetors,
use #1493 or 1847 throttle plate kit to line up the stock throttle bracket to the Edelbrock carburetor throttle lever.
• GASKETS: Do not use competition-style intake gaskets for this street manifold. Due to material deterioration over time, internal leakage of
vacuum, oil, and coolant may occur.
INTAKE MANIFOLD REFERENCE RECOMMENDED GASKET
7564 (None) Edelbrock #7265 Port: 1.52” x 2.16”, .060” Thickness
NOTE: To ensure maximum performance and a proper seal, Edelbrock gaskets which are
specifically designed and manufactured for use with Edelbrock parts must be used.