Filter
Top Products
6
REMOTE ENGINE STARTING Cont. (IDLE DOWN MODE)
IDLE DOWN MODE - EXITING THE VEHICLE:
1) With vehicle engine running with key, **press the Remote Start button for at least a 1/2 second or twice if
set for double press.
2) Parking Lights will turn ON.
3) Doors will unlock, or if brake pedal is being depressed, doors will unlock when it is released.
4) Turn OFF Ignition and remove key. Engine should remain running.
5) Exit vehicle, then remote lock doors if desired.
6) Engine will remain running for programmed run time or until you return (whichever comes first).
IGN
SOLID
OFF
UNLOCK
ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:
1. With engine running in "IDLE DOWN" (parking lights ON), unlock door via remote or key.
2. Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset)
3. Turn Ignition to ON/RUN position, then depress brake pedal to reset the Remote Starter. Parking lights
will turn off indicating the Remote Start is OFF and Vehicle is running by the Key. Drive away as normal
INFINITY RUN MODE
This mode can only be activated when "Idle Down" procedure. The Infinity Run mode allows the vehicle
engine to remain running INDEFINITELY after the programmed run time elapses. This mode will allow the
vehicle to be left running and unattended without the ignition key in the switch preventing the vehicle from
being stolen. This mode can be beneficial to law enforcement or commercial trucks that need to remain
running unattended for long periods of time. See next page for Infinity mode steps.
**Programmable for ½ second press or double press. This option is selectable by your installer.