Filter
Top Products
13
EZ START
VEHICLE #2
Press side button
first, then you have
4 seconds to
control vehicle #2.
2-VEHICLE OPERATION & PROGRAMMING
A single EZ-30 SERIES II remote can control two different vehicles with EZ-30 SERIES II systems installed.
SETUP:
Follow the “Transmitter Programming” steps on the second
vehicle below. Program Car #2’s existing remotes, then
quickly press the Car #2 side button on your remote before
pressing the lock button on your remote to program it to Car
#2. Once your remote is programmed to the second
vehicle, press the car #2 side button on your remote first,
and within 3 seconds press any of the 4 function buttons on
your remote. You can keep pressing function buttons to
control car #2 as long as it is within the 3-second window.
After 3 seconds have elapsed, the remote will revert back
to Car #1 control.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
IGN
OFF
(FOR EZ-31DP II PRESS THE START BUTTON)
PRESS LOCK BUTTON
VEHICLE #2
Press Vehicle #2
Side Button first.
EZ START